New Arrival Novermber 2020

KONNWEI KW208 12V car battery tester is able to effectively analyze and read important car data such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status.  It provides accurate results, calculates the cold cranking capability of the battery and the aging extent, allowing for a quicker, more precise car repairing.Test results display in both text and graphing, but the realtime battery voltage showing in a waveform.With an intelligent 2.4” Backlit and STM32 main chip, reading access is practical and rapid! Lifetime update service is supported by KONNWEI BTlink app.

Tired of spending your money, time and energy on expensive mechanics for routine check-ups?

 Would you like to correctly self-diagnose your car battery? The KW208  auto battery tester is exactly what you need!

【DATA READINGS】The KONNWEI KW208 12V car battery tester is able to effectively analyze and read important car data such as voltage,

 internal resistance, cold cranking amp and AH capacity, battery health and charge status.

【ACCURATE MEASUREMENTS】This professional automotive battery tester provides accurate results, calculates the cold cranking capability of

 the battery and the aging extent, allowing for a quicker, more precise car repairing.

【WIDELY COMPATIBLE】Beginner or expert, this car battery diagnostic tester can be used with a wide selection of 

12V 100-2000 CCA regular flooded batteries, AGM flat plate, AGM spiral, as well as GEL batteries.

【EXTRA FEATURES】The KW208 car battery tester displays test results in text and graphing, 

displaying the real-time battery voltage in a waveform. With an intelligent 2.0” backlit and STM32 main chip, 

reading access is practical and rapid! Lifetime update service is supported by KONNWEI BTlink app

Function :

System voltage 12 Volts and Voltage test in waveform

Test Result Good, Recharge or Replace

Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.

Internal resistance value (mΩ) and Life in percentage (%)

Cranking system and Charging system

Record and re-play battery data, Life-time free update service

Battery test, cranking test, charging test and other additional functions.

The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN，DIN and IEC are supported

Feature :

Measure Standard ,CCA 100-2000 ,BCI 100-2000 ,CA 100-2000 ,MCA 100-2000,

JIS 26A17-24SH52 ,DIN 100-1400 ,IEC 100-1400 ,EN 100-2000 ,SAE 100-2000,

System Voltage 12 Volts ,Input Voltage Range 8V-16V ,Power Requirements are

no internal batteries required,Power on when hooked up during testing.

KW208  battery tester key functions & features:

1.System voltage: 12 Volts

2.Test Result: Good, Recharge or Replace

3.Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.

4.Internal resistance value (mΩ)

5.Life in percentage (%)

6.Cranking system

7.Charging system

8.Voltage test in waveform

9.Record and re-play battery data, Life-time free update service

10.Battery test, cranking test, charging test and other additional functions.

Specifications and Support Languages:

1.Measure Standard

2.CCA:100-2000

3.BCI:100-2000

4.CA:100-2000

5.MCA:100-2000

6.JIS:26A17-24SH52

7.DIN:100-1400

8.IEC:100-1400

9.EN:100-2000

10SAE:100-2000

11.Display: Color TFT LCD Screen

12.System Voltage:12 Volts

13.Input Voltage Range:8V-16V

14.Power Requirements: No internal batteries required.

15.Power on when hooked up during testing.

16.Operating Temperature：0℃-50℃

17.Storage Temperature：-20℃-70℃

Support  8  Languages : English, German, French, Dutch, Russian, Spanish, Italian ,Portuguese

Application:

Use a test a wide range of 12v batteries(Starting{SLI},Deep Cycled and Marine) of Wet(Flooded),VRLA or Maintenance Free (MF),Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM),EFB and GEL Cell.